Product Name:
SM & SMBW 4000 Sheet Molded
Category:
Filters, DE
Manufacturer:
Pentair
Note:
Look for part numbers starting with APC for high quality, lower cost non branded items.
Some Pentair products may have previously been branded as American, Kreepy Krauly, Letro, PacFab, Purex, Rainbow.
If you order a tapered rotor seal and attempt to install it into a straight sided casting, the seal will be cut. If you install a straight seal in a tapered casting, the valve will leak. The tapered seal can be identified by a mark on each of the vertical legs signifying the top of the seal. Since the straight seals are not directional, they have no marks on the vertical legs. The tapered seal part# is 071720. The straight seal part# is 071719, which is no longer manufactured. Both 2000/4000 series filters with backwash now use the same Noryl rotor and the tapered seal. The product number for the rotor and seal assembly part# is 073370. Tapered castings have a letter "T" stamped into the underside of the middle pump port. Don't confuse this with a letter "T" in felt pen, which means the assembly has been pressure tested.
(a): For filters pre 1998.
(b): For filters after 1998.
(c): For filters pre 1999.
(d): For filters after 1999.
Look for part numbers starting with APC for high quality, lower cost non branded items.
Some Pentair products may have previously been branded as American, Kreepy Krauly, Letro, PacFab, Purex, Rainbow.
If you order a tapered rotor seal and attempt to install it into a straight sided casting, the seal will be cut. If you install a straight seal in a tapered casting, the valve will leak. The tapered seal can be identified by a mark on each of the vertical legs signifying the top of the seal. Since the straight seals are not directional, they have no marks on the vertical legs. The tapered seal part# is 071720. The straight seal part# is 071719, which is no longer manufactured. Both 2000/4000 series filters with backwash now use the same Noryl rotor and the tapered seal. The product number for the rotor and seal assembly part# is 073370. Tapered castings have a letter "T" stamped into the underside of the middle pump port. Don't confuse this with a letter "T" in felt pen, which means the assembly has been pressure tested.
(a): For filters pre 1998.
(b): For filters after 1998.
(c): For filters pre 1999.
(d): For filters after 1999.
Enter a quantity next to one or more key items and press the 'add to cart' button to place in your shopping cart.